Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Easily and Quickly Replace the Rear Shock Absorbers on a Citroen C4

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Shocks

Before proceeding with the removal and replacement of the rear shock absorbers, ensure that the engine is off and the handbrake is properly engaged. Use a hydraulic jack to lift the car and remove the two wheels. Unscrew the bolt located on both sides at the bottom of the shock absorber. Repeat the same operation for the two upper bolts and finally remove the two shock absorbers. At this point, simply replace them with new models. To fit them correctly, perform the previous operations in reverse order. Ensure that both sides are set to the same ground height.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorbers on a Citroen C4
How to Replace the Rear Shock Absorbers on a Citroen C4
Citroen C4 (2010-2018 / MK 2) To change the rear shock absorbers, lift the car. Do not rely solely on your jack; place spacers between the car and the ground, such as a couple of …
How to Replace the Rear Shock Absorbers on a Citroen C4
How to Replace the Rear Shock Absorbers on a Citroen C4
Citroen C4 (2010-2018 / MK 2) On a Citroen C4, replacing the rear shock absorbers is a typical task when the rear end becomes softer, the car bounces over bumps, or there are shar…
How to replace the turn signal bulb of the Citroen C4 Picasso
How to replace the turn signal bulb of the Citroen C4 Picasso
Citroen C4 (2020-2026 / MK 3) Replacing the side turn signal bulb of the Citroen C4 Picasso is a simple and quick operation to be carried out independently. The cost of the bulb, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos