Do it yourself
Frequently asked questions about cars and motorcycles

Changing the Cylinder Head Gasket

Model: Citroen C5 MK 1, DC - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine

See other generations:
Video tutorial

The cylinder head gasket is placed between the cylinders and the cylinder head and serves to ensure that the coolant does not come into contact with the oil. The main cause of its wear is overheating. First, drain the engine oil and coolant, remove the air filter, and detach the alternator belt, accessory belt, spark plugs, and their respective leads.

During reassembly, pay particular attention to the tightening phase of the cylinder head with the new gasket to the cylinder block. A torque wrench will be needed to tighten the bolts to the correct torque value.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Citroen C5 (2000-2008 / MK 1, DC) When performing a repair that requires the removal of the cylinder head, it is good practice to use a new set of gaskets and bolts during reassembly:…
Citroen C5 (2008-2017 / MK 2, RD, X7) To replace the rear light bulb on a 2015 Citroën C5, open the boot of the vehicle and remove the side carpet to access the inside of the light unit. …
Citroen C5 (2000-2008 / MK 1, DC) Replacing the camshaft oil seal is straightforward but requires removing the timing pulley and the timing belt itself: you need to be familiar with d…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel on a Renault Trafic Van?

In this tutorial, you will see how to remove the spare wheel on a Renault Trafic van, a very simple and quick operation, for example, in case of a puncture. First, open the driver's door, then locate the tool kit stored behind the seat. Next, go underneath the vehicle at the rear, identify the two indicated bolts, and unscrew them using a socket spanner. At this point, grasp the frame, push it towards the left side of the vehicle, and remove the wheel. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos