Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Citroen C-Crosser?

Model: Citroen C Crosser MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuse box

Video tutorial

In this video, you can see the diagrams of the fuse boxes and their locations in the Citroen C-Crosser, useful in case you need to check the fuse of a malfunctioning device. As shown, this model has one fuse box inside the cabin, behind the small glove compartment on the driver's side.

The second and final box is located in the engine compartment, just to the right of the battery. If a fuse needs to be replaced, always use a replacement of the same amperage to avoid causing any damage.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How do you reset the service light on the Citroën C-Crosser?
How do you reset the service light on the Citroën C-Crosser?
Citroen C Crosser (2007-2012 / MK 1) .. To reset the Service light on the Citroën C-Crosser, you need to insert the key into the ignition switch so that you can turn on the instrument panel: .. …
How is the service performed for the Citroen C Crosser?
How is the service performed for the Citroen C Crosser?
Citroen C Crosser (2007-2012 / MK 1) .. No different from other cars, the Citroen C Crosser is equipped with a service light, and when it comes on, it is necessary to perform a service.. …
Resetting the Service Light on a Citroen C-Crosser
Resetting the Service Light on a Citroen C-Crosser
Citroen C Crosser (2007-2012 / MK 1) .. routine maintenance oil change on the Citroen C-Crosser. First, get in the vehicle and turn on the ignition; then navigate to the settings of the onboard.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos