Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil pressure sensor located in the Citroen Berlingo van?

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the engine oil pressure sensor is located in the Citroen Berlingo van, useful in case you need to replace it due to a fault. As shown, it is positioned about halfway up on the front left side of the engine when looking at the vehicle from the front, and it is accessible from the engine bay. Remove the sensor; this operation is very simple and quick.

Just disconnect the power connector and loosen it using a spanner. Following the reverse procedure will allow you to fit the replacement part.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to reset the tire warning light on a Citroen Berlingo van?
How to reset the tire warning light on a Citroen Berlingo van?
Citroen Berlingo (2018-2026 / MK 3) In this tutorial, we will see how to reset the tire warning light on the Citroen Berlingo van. This operation is extremely simple and quick, and shou…
How to Reset the Tyre Light on a Citroen Berlingo Van?
How to Reset the Tyre Light on a Citroen Berlingo Van?
Citroen Berlingo (2018-2026 / MK 3) In this tutorial, you will see how to reset the tyre light on a Citroen Berlingo van, an extremely simple and quick operation, to be performed only a…
How to Reset the Service on a Citroen Berlingo Van?
How to Reset the Service on a Citroen Berlingo Van?
Citroen Berlingo (2018-2026 / MK 3) In this tutorial, we will see how to reset the service on a Citroen Berlingo van, a very simple and quick operation that should only be done once all…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos