Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Citroen Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

Video tutorial

This tutorial shows how to replace the battery in a Citroen Xsara Picasso, a very simple and quick operation. Before starting, to work safely, ensure that the key is not in the ignition.

Start by reclining the driver's seat and removing the headrest, then release the two levers of the slides and lift it from the front. Next, using a 10 mm spanner, loosen the nuts on both terminals, disconnect them, and unscrew the nuts of the upper mounting bracket.

At this point, you can remove the battery and install the replacement by following the reverse procedure.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Citroen Xsara Picasso
How to Replace the Battery on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this brief video tutorial, learn how to replace the battery on a Citroen Xsara Picasso 2.0 HDI. The battery is located under the driver's seat. Fi…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How to Replace the Battery of the Citroën Xsara Picasso?
How to Replace the Battery of the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) To replace the battery of the Citroën Xsara Picasso, push the driver's seat fully forward to locate the panel covering the floor underneath: this pan…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos