Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to disassemble the airbag of a 2017 Citroen C3.

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Airbags
Operation: How to disassemble the airbag of a 2017 Citroen C3.

Removing the airbag from a Citroen C3 is not a very simple operation, but with the help of this short video tutorial, we will try to explain how to carry out this intervention independently. First, you must disconnect the car battery because if the airbag is activated during the removal procedure, you could be injured, even seriously. After taking this precaution, you can proceed by inserting a screwdriver into the appropriate hole behind the steering wheel. We repeat the same procedure for both the right and left sides. At this point, we can proceed with the disassembly of the connectors and the airbag itself.


Posted on 1 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - Where is the Citroen C3 airbag fuse located? Read Answer
    • C3 2009-2016 - Why did the airbag light come on in the Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos