Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service on the Citroen Relay van?

Model: Citroen Citroen Various
Part: Service warning light

Resetting the oil service in the Citroen Relay van is a very simple and quick operation, let's see how to proceed in this tutorial. Before doing this, make sure to have completed all the required maintenance work. Let's start by going inside the cabin, then turn on the instrument panel, do not start the engine, and press both the brake and accelerator pedals all the way down. At this point, keep both pedals in position for about 15 seconds, then turn off the vehicle, turn it on again, and verify that the procedure has been successful.

Posted on 8 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Resetting the engine oil change indicator on a Citroen Relay.
Resetting the engine oil change indicator on a Citroen Relay.
Citroen Citroen Various In this very short video tutorial today, we will see the procedure for resetting the service light, which indicates the remaining life of the engine …
How to replace the clutch of Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
How to replace the clutch of Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
Citroen Citroen Various Today's main steps will show us how to disassemble and replace the clutch of the Citroen Relay 2.2 HDI, as well as the Peugeot Boxer and the Fiat Duc…
How to reset the Citroen Relay oil warning light
Citroen Citroen Various If the oil change warning light continues to appear on the dashboard display of your Citroen Relay even though you have already done the change, you …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos