Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the ignition barrel from the Citroën Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

Video tutorial

In this video tutorial, you will see the steps on how to remove and replace the ignition barrel of the Citroën Xsara Picasso. First, get inside the vehicle and start by removing the plastic cover of the steering wheel; then unscrew the screws securing the lock barrel, disconnecting the electrical wiring to remove it along with the steering lock, as shown in the video.

At this point, install the new ignition barrel, consequently replacing the key; apply the reverse procedure for reassembly!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Remove the Ignition Switch on a Citroen Xsara Picasso
How to Remove the Ignition Switch on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial, see how to remove the ignition switch on a Citroen Xsara Picasso. First, disconnect the negative terminal of the battery, then unsc…
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before starting, lift the rear of your Citroen Xsara Picasso. Begin by loosening and removing the bolts that secure the rear wheel to the hub, then r…
Removing the Bulb from Citroen Xsara Picasso
Removing the Bulb from Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this short but effective video, we will see how to remove the headlight bulb (main and dipped beam) from the Citroen Xsara Picasso. The process of…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos