Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Switch on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Checks and maintenance

In this tutorial, see how to remove the ignition switch on a Citroen Xsara Picasso. First, disconnect the negative terminal of the battery, then unscrew all the screws securing the plastic covers of the steering column using a Torx T20 screwdriver. Once every panel and the lower control console are removed, disconnect the power connectors of the ignition switch and proceed with its removal. To do this, remove the outer plastic frame, unscrew the rear screw, and press the lock located inside the indicated slot with a flat-head screwdriver.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the ignition barrel from the Citroën Xsara Picasso
Removing the ignition barrel from the Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial, you will see the steps on how to remove and replace the ignition barrel of the Citroën Xsara Picasso. First, get inside the v…
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before starting, lift the rear of your Citroen Xsara Picasso. Begin by loosening and removing the bolts that secure the rear wheel to the hub, then r…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos