Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Light on a Citroen C1 - Peugeot 107 - Toyota Aygo

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

Today's guide shows how to reset the tyre pressure warning light (TPMS) on the Toyota Aygo. Before performing the reset, ensure all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition.

Open the glove compartment and press and hold the TPMS reset button for a few seconds until the warning light completely resets on the instrument cluster, as shown in the video. At this point, turn off the ignition and finally start the engine, checking that it has reset!


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) .. the speakers in the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get inside the vehicle and start by removing the speakers located.. …
How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo
How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) .. the remote key for the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get into the vehicle with your new key to be programmed; then insert.. …
How to Turn Off the Engine Warning Light on the Citroen C1
How to Turn Off the Engine Warning Light on the Citroen C1
Citroen C1 (2005-2014 / MK 1) .. light illuminated on the dashboard of your Toyota Aygo/Citroen C1/Peugeot 107 first generation, a common cause is the oxygen sensor on the exhaust.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos