Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4 Picasso
    4. : How to remove the steering wheel controls of the Citroen C4 Picasso

Citroen C4 Picasso - Video tutorial

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Steering wheel
Operation: How to remove the steering wheel controls of the Citroen C4 Picasso

In order to remove the steering wheel controls on the side of the steering wheel spokes, you must first remove the airbag container in the center: first of all it is advisable to disconnect one pole of the battery to prevent any warning lights from turning on; at this point it is necessary to intercept the hole in the lower part of the steering wheel, in the central position, through which to insert a screwdriver with which to press on the spring that holds the airbag itself in place; once the airbag has been released, disconnect the sockets and remove it and then unscrew the fixing screws of the frame that houses the steering wheel controls; at this point, remove the chromed elements in the center of the controls, lift the applied film and complete the disassembly by removing the screws below.


Posted on 19 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos