Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Citroen Jumpy van?

Model: Citroen Jumpy MK 2 - Years 2007-2016
Part: Starter motor

In this tutorial we can see how to replace the starter motor in the Citroen Jumpy van, a very simple and quick operation. First of all, we open the driver's door, then remove the indicated panel and disconnect the negative terminal of the battery. We then open the engine hood, lift the front side of the vehicle and remove the lower cover, the air filter box and the clutch pump without disconnecting their respective tubes. At this point, we can disconnect the power terminals of the starter motor, unscrew the fixing bolts and separate it from the support. To install the replacement, simply follow the reverse procedure.

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Light on a Citroen Jumpy Van?
How to Reset the Tyre Light on a Citroen Jumpy Van?
Citroen Jumpy (2016-2026 / MK 3) In this tutorial, you will see how to reset the tyre light on a Citroen Jumpy van, a very simple and quick operation to perform only after restoring …
How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …
How to reset the service in the Citroen Jumpy van?
How to reset the service in the Citroen Jumpy van?
Citroen Jumpy (2016-2026 / MK 3) Resetting the service in the Citroen Jumpy van, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we mus…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos