Do it yourself
Frequently asked questions about cars and motorcycles

How to Connect to the OBD Port of a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

Today’s main steps will show you how to connect to the OBD diagnostic port, allowing access to the engine control unit parameters of the Dacia Duster. First, get inside the vehicle and open the glove compartment; at the back, you will find the OBD port that allows you to connect your diagnostic tool, as illustrated in the video.

To enable the ignition, turn the key to position one; finally, disconnect the tool and close the glove compartment!


Updated on 24 October 2026 by ScegliAuto


Related tutorials

Dacia Duster (2010-2017 / MK 1, HS) If you cannot find the OBD port in your first-generation Dacia Duster, don't worry because with the instructions in this new guide, you will be able …
Dacia Duster (2017-2024 / HM, MK 2) To be able to locate the OBD port inside your Dacia Duster second series, all you have to do is follow the few simple steps described in the followin…
Dacia Duster (2010-2017 / MK 1, HS) If you want to connect a diagnostic tool to your first-generation Dacia Duster (2015) to resolve any issues or errors from the ECU, but don't know wh…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - What's the problem with the Dacia Duster's LPG? Read answer
    • Duster 2017-2024 - Where is the lpg filter located in the Daciaa Duster? Read answer
    • Duster 2010-2017 - Where is the inertia switch of the Dacia Duster located? Read answer
    • Duster 2017-2024 - What does the Dacia Duster "Anti-Pollution Control" label mean? Read answer
    • Duster 2017-2024 - Where is the horn of the Dacia Duster located? Read answer
    • Duster 2017-2024 - Where do i find the jack on a Dacia Duster? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos