|
Do it yourself
| |||
| ||||
How to turn off the AdBlue warning light on a Dacia vehicle.
Model: Dacia Duster
HM, MK 2
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
In this video, we will see how to turn off the AdBlue warning light on a Dacia Duster MK2, but the method is applicable to all Dacia vehicles: the warning light is on along with a message indicating that the engine will stop after a certain number of kilometers. After refueling, the light did not turn off, and the YouTuber used a diagnostic tool through the EOBD port, which is located at the bottom of the dashboard near the cabin fuse box. We can find the recommended diagnostic tool from the YouTuber on klavkarr.com by selecting the make and model of our vehicle. We follow the very intuitive instructions of the device until we select the error code generated by the control unit in order to clear it, and then the display will show a message indicating that it is possible to start the engine. However, to ensure that the reset is recognized, we need to turn off the engine and wait a few minutes before restarting the car.
Posted on 30 November 2025 by ScegliAuto
Related tutorials
Dacia Duster
(2010-2017 /
MK 1, HS)
This video shows how to turn off the AdBlue warning light in a Dacia Duster. First, refuel the AdBlue. In the Dacia Duster, the AdBlue filler is loca…
Dacia Duster
(2017-2024 /
HM, MK 2)
To reset the AdBlue warning light on the Dacia Duster, open the fuel filler flap, located at the rear right of the vehicle: beneath this flap, you wi…
Dacia Duster
(2017-2024 /
HM, MK 2)
Today's guide will show you the steps to reset the AdBlue warning light on the Dacia Duster, as well as the Sandero. First, top up the AdBlue fluid b…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.121
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
