Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Secret Menu of the On-Board Computer in a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Onboard computer

See other generations:
Video tutorial

To access the secret menu of the on-board computer in a Dacia Sandero, first, start the navigator and turn on the engine by turning the ignition key. Wait until the radio appears on the display. At this point, you can turn off the navigator.

Now press the button on the top left of the display. Quickly press the "+" and "-" buttons.

Insert an empty USB stick into the appropriate socket, and the secret menu you were looking for will appear. You can interact with the menu interface, for example, using a capacitive pen. This procedure is valid for any MEDIA NAV with updates not exceeding version 4.03.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to modify the onboard computer interface of the Dacia Stepway.
How to modify the onboard computer interface of the Dacia Stepway.
Dacia Sandero (2012-2020 / B8) Today we will explain how to modify the onboard computer interface of the Dacia Sandero. To perform this operation, we need to access the Dacia websi…
How to reset the service light on a 2018 Dacia Sandero Stepway?
How to reset the service light on a 2018 Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) Follow the instructions in the video to reset the service light on the Dacia. This procedure takes only a few minutes and applies to Sandero, Duster,…
How to Reset the Trip Information on the Dacia Sandero 3
How to Reset the Trip Information on the Dacia Sandero 3
Dacia Sandero (2021-2026 / MK 3) The following video tutorial shows how to reset the trip information on a Dacia Sandero 3 vehicle produced from 2021 to the present independently and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos