Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Topping Up the Windscreen Washer Fluid on a Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Windshield wipers

See other generations:
Video tutorial

With the handbrake engaged and the engine off, lift the bonnet and look to your left (facing the vehicle): as clearly shown in the last part of the video, this is where the windscreen washer fluid reservoir is located. Open the yellow cap and insert a funnel, then pour in the washer fluid until the reservoir is full.

When doing this in winter, especially if you live in cold areas, add some antifreeze. In this very useful video, you can also see how to top up other fluids: engine oil, brake fluid, and coolant.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Perform Checks on the Dacia Sandero
How to Perform Checks on the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) In today's video, learn how to perform maintenance checks on the Dacia Sandero. First, we recommend working with a cold bonnet to avoid unpleasant bu…
How to Replace the Air Filter of the Dacia Sandero
How to Replace the Air Filter of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is likely time to replace the air filter. This guide will explain t…
How to Open the Bonnet on the Dacia Sandero
How to Open the Bonnet on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) This presentation video of the Dacia Sandero shows how to open the bonnet. To open the bonnet on the Dacia Sandero, go to the cabin where the bonnet …

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where do you pour windshield washer fluid in the Dacia Sandero? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos