Do it yourself
Frequently asked questions about cars and motorcycles

What is the Fuse Diagram for the Dacia Sandero?

Model: Dacia Sandero B8 - Years 2012-2020
Part: Fuse box

The fuse boxes of the vehicle are located, one in the engine compartment near the battery and one in the cabin to the left of the steering wheel under the dashboard, protected by a plastic cover. The fuse diagram within the engine compartment is as follows: Ef1 40A Right windscreen heater; Ef2 40A Left windscreen heater; Ef3 50A ABS/ESP; Ef4 Immobiliser 60A, cabin power supply fuse F28-F31; Ef5 Cabin fuse power supply 60A F11, F23-F27, F34 and F39; Ef6 30A ABS/ESP; Ef7 30A Heated rear window and mirrors; Ef8 15A Front fog lights; Ef9 15A Heated seats; Ef10 15A Air conditioning clutch (with air conditioning); 25A First speed of the electric fan (without air conditioning); Ef11 Relay fuse engine management system 25A; Ef12 40A Cooling system electric fan; Ef13 15A Engine management system; Er1 35A Relay for left window heating; Er2 35A Relay for proper glass heating; Er3 Fuel pump relay 20A; Er4 Air conditioning compressor relay 20A or first speed electric fan (if equipped); Er5 35A Engine control relay.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) We will briefly look at the fuse diagram and layout for the Dacia Sandero by following these simple steps. First, open the driver's side front door a…
Dacia Sandero (2021-2026 / MK 3) In today's article, we will see, with the support of the video tutorial below, the fuse diagram and the position of the fuse box of the Dacia Sandero…
Dacia Sandero (2021-2026 / MK 3) In this guide, we will see the instructions that will allow us to identify the internal fuse scheme and diagram of the Dacia Sandero. First, we open …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos