Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on a Dacia Duster

Model: Dacia Duster HM, MK 2 - Years 2017-2024
Part: Warning light – error code

After replacing the engine oil and the related filter, it will be necessary to update and clear the indication on the instrument cluster. To do this, follow the instructions below and also refer to the video. First, sit in the driver's seat and turn on the ignition; then, using the up and down arrow buttons on the right side of the steering wheel, scroll through the onboard computer menu until you reach the service indication. At this point, press and hold the "up arrow" button for a few seconds until the timing and mileage until the next service updates. Then release the button and turn off the ignition.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Duster (2010-2017 / HS, MK 1) On the Dacia Duster, the maintenance interval reset is performed with the engine off. With the Dacia Duster stationary, turn the ignition to ON witho…
Dacia Duster (2017-2024 / HM, MK 2) Start by sitting in the driver's seat of your Dacia Duster. Next, activate the instrument cluster by turning the key in the ignition switch. After do…
Dacia Duster (2017-2024 / HM, MK 2) In this tutorial, see how to reset the service light on the Dacia Duster, an extremely simple and quick operation, to be performed only after complet…

Other guides you may be interested in

    Frequently Asked Questions

    • Duster 2017-2024 - How to recover the radio code of a Dacia Duster? Read answer
    • Duster 2017-2024 - What is the meaning of the red lights on the Dacia Duster? Read answer
    • Duster 2017-2024 - What does the Dacia Duster zigzag line warning light mean? Read answer
    • Duster 2017-2024 - What to do if the anti-pollution warning light comes on on the Dacia Duster? Read answer
    • Duster 2017-2024 - What are the spies of the Dacia Duster? Read answer
    • Duster 2010-2017 - Where to find the radio code on Dacia Duster? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos