Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to replace the headlight bulb on Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Headlight bulb
Operation: How to replace the headlight bulb on Dacia Sandero

Replacing the headlight bulb of your Dacia Sandero is undoubtedly one of the simplest maintenance operations that can be carried out in total autonomy. Before discovering how to do it, we remind you that it is preferable to disconnect the battery so as to completely cancel any possible risk to your health. Once this is done, you can move on to the actual replacement. Lift the front hood and go to the side where the bulb to be changed is located. Remove the plastic cover on the inside of the engine compartment. Unplug the connector and remove the old bulb. Replace it with the new one and reattach the connector. Finally, replace the plastic cap correctly and reconnect the battery.


Posted on 16 August 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sandero 2012-2020 - Why don't the blinding lights of the Dacia Sandero work? Read Answer
    • Sandero 2008-2012 - How to replace the low beam bulbs on the Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos