Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to remove the glow plugs on the Dacia Sandero.

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: Glow plugs
Operation: How to remove the glow plugs on the Dacia Sandero.

If we intend to replace the glow plugs on this car model, in the description below we will have all the indications and procedures to follow for a smooth replacement. Once the engine hood is open, the negative battery terminal is disconnected, the air duct clamp is loosened, and the duct itself is removed. Underneath it, we will find the engine cover that we will remove by unscrewing the support screws. This way, we will have access to the glow plugs and we can proceed to disconnect the power supply terminal and then unscrew and remove each individual glow plug.


Posted on 16 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2008-2012 - How much do the glow plugs of the Dacia Sandero Stepway diesel cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos