|
Do it yourself
| |||
| ||||
The problem of the wastegate valve on the Dacia Duster
Model: Dacia Duster
HM, MK 2
- Years 2017-2024
In this video we see a rather common problem on the Dacia Duster: that of the wastegate valve on the car's turbo. It is a valve located in the exhaust manifold (turbine side) and its opening is determined by the boost pressure on the compressor side. The valve has a lever that makes this strange noise that we heard in the video; it is heard at low speeds, but if the problem is serious it is always heard. Unfortunately, the valve is located in a difficult place to reach, you have to go behind the reflective shield; as long as it remains like this it is just annoying, it is just the lever that has a bit of play. Otherwise, we will feel that the engine does not "pull" as it should and the noise becomes practically continuous: Unfortunately, Dacia is aware of the problem but they are not authorized to replace it. To change it by yourself, you need to remove the turbo as well: a not insignificant job.
Posted on 31 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2017-2024 /
HM, MK 2)
In this video, we see a rather annoying problem that has occurred in some second series Dacia Duster models with LPG systems. The issue is caused by …
Dacia Duster
(2017-2024 /
HM, MK 2)
In this video, you will see a problem that occurred during the test of a second-generation Dacia Duster with the manufacturer's LPG system. It appear…
Dacia Duster
(2010-2017 /
HS, MK 1)
To easily locate the OBD port inside your Dacia Duster first edition, simply follow the procedure described below. First, enter the car and reach the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.394
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |