Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the DR F35?

Model: DR F35 MK 1 - Years 2020-2026
Part: Light bulb

In order to replace the front headlight bulb of the DR F35 bis, you need to open the hood so that the screws securing the panel on the top of the hood can be loosened. Once this is removed, you will have access to the bulb located inside the optical group by removing its protective cover. After removing the cover, you can remove the bulb by disconnecting its connector and replacing it with a new one. After the replacement, you can re-install the panel in the front engine compartment.

Posted on 26 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in DR F35?
How to reset the service in DR F35?
DR F35 (2020-2026 / MK 1) In this tutorial, we can see how to reset the service in the DR F35, a very simple and quick operation, to be carried out only after completing all t…
How to replace the cabin filter in the DR F35?
How to replace the cabin filter in the DR F35?
DR F35 (2020-2026 / MK 1) In this tutorial we can see how to replace the cabin filter in the DR F35, a very simple and quick operation. First of all, go to the passenger side,…
How to perform the routine maintenance service for the DR F35.
How to perform the routine maintenance service for the DR F35.
DR F35 (2020-2026 / MK 1) In this guide, we will look at the steps that will allow us to perform the routine maintenance service for the DR F35. First, let's open the car's ho…

Other guides you may be interested in

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos