Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Timing belt

Today's guide will show us the procedure for disassembling and replacing the timing belt and water pump of the Fiat 500. First, we open the hood of the car and start by removing the engine support, removing the bumper first; then we lift the car and remove the timing cover, as shown in the video. At this point, we take the necessary references for the replacement of the belt, removing it and replacing it with the new original one; we insert it correctly without changing the engine timing, following the video tutorial until the end!

Posted on 21 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
Replacement of the timing belt of the Fiat 500 1.2
Replacement of the timing belt of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) Today we will see the guidelines for replacing the timing belt of the Fiat 500 1.2. First, we open the hood and start disassembling and removing the …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - When to replace the Abarth 500 timing belt? Read answer
    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos