Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the passenger side airbag on the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Airbag

In this video, we see how to disassemble the passenger side airbag of a Fiat Panda 169: the first thing to do is to disconnect the battery, to avoid the airbag exploding in our face. To remove the airbag, we will need to remove the glove compartment, which is held in place by five screws, two external and two internal, plus a very visible central one. We then remove an electrical connector on the left, and expose the three torx screws that hold the airbag module in place: once the screws are removed, we need to disconnect the electrical connector on the left side. There are many used ones available online at a good price, so it will be easy to replace it. Put it back in place following the reverse path, and then put the glove compartment back in place as well.

Posted on 14 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Airbag and Steering Wheel on the Fiat Panda 2 (169)
How to Remove the Airbag and Steering Wheel on the Fiat Panda 2 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove the airbag and steering wheel on the Fiat Panda second series, version 169, by following these s…
How to Remove the Driver's Airbag from a Fiat Panda
How to Remove the Driver's Airbag from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the driver's airbag (steering wheel) from a Fiat Panda? This operation is straightforward if you follow the steps: insert a medium-leng…
How to Replace the Airbag on a Fiat Panda Mk2
How to Replace the Airbag on a Fiat Panda Mk2
Fiat Panda (2003-2012 / 169, MK 2) To remove the airbag on a Panda Mk2, start by dismantling the glove compartment: disconnect the negative terminal of the battery (due to the airbag m…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos