Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Brake pads

To carry out this replacement, lift the vehicle on the affected side, then remove the wheel. Next, you can remove the piston by unscrewing the two bolts at the rear; if necessary, use an adjustable spanner. After removing the piston, you can then remove the brake pads by unscrewing the additional bolts that secure them at the rear. Repeat the operations on each brake, then retrace the steps described for reassembling the various components removed.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Brake Pads on a Fiat Panda
How to Remove the Brake Pads on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Remove the worn front brake pads from the brake disc on a Fiat Panda. Lift the car on a jack to the desired height, then remove the wheel (using a so…
How to Replace the Front Brake Pads on a Fiat Panda 169
How to Replace the Front Brake Pads on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows the steps to remove and replace the front brake pads on a Fiat Panda 169, second series. First, remove the front wheel by lifting th…
How to Change the Brake Pads on a Fiat Panda
How to Change the Brake Pads on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to replace the front brake pads on a Fiat Panda. Lift the car on a column lift (jack) to the desired height, then remove the wheel (with a …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How much does it cost to replace the brake pads of a Fiat Panda? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos