Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove and Replace the Spark Plugs on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Spark plugs

This video shows how to remove and replace the spark plugs on a Fiat Punto Evo. Open the engine bay, lift the front bonnet, and secure it. Disconnect the battery terminals. Remove the soundproofing panel covering the air filter, then use a screwdriver to take off the coils from the engine head. Next, use a socket spanner to unscrew the spark plugs and pull them out of the head. Take the new spark plugs and guide them into the engine head using the socket extension, tighten them, and reconnect the power coils to each spark plug with the new leads. Finally, close the bonnet and test their proper functioning by starting the car.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short guide, we will see the instructions that will allow us to disassemble and replace the glow plugs of the Fiat Punto Evo and Grande Punto…
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will learn how to remove and replace the glow plugs on the Fiat Punto 1.3 Multijet, as well as on the Grande Punto and…
How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos