Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LCD Screen Accessory Kit

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Accessory kit

To install an LCD screen, it is recommended to prepare the housing in line with the central air duct. First, remove the plastic frame housing the air flow direction grilles and then the underlying duct. At this point, you need to shape the duct (using side cutters and a utility knife) so that it can accommodate the screen. Once the shape for the screen is made, properly seal the air outlets to protect the screen, leaving only the side ones open. After completing the work on the duct, work on the grilles by removing the central part corresponding to the screen. Now you can proceed with the installation, paying attention to the cable routing and securing the monitor.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing a LED Lighting Accessory Kit in the Glove Compartment
Installing a LED Lighting Accessory Kit in the Glove Compartment
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Illuminating the glove compartment is a convenience when searching for items at night. Obtain the LED kit. Lift the soft cover of the gear lever and …
How to Use the Tyre Inflation Kit on a Fiat Punto
How to Use the Tyre Inflation Kit on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, we will see how to use the tyre inflation kit provided with Fiat models, including the Punto. First, ensure the car is parked in a …
Guide to Installing Central Locking on the Fiat Grande Punto
Guide to Installing Central Locking on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's guide will show you the main instructions needed to install a new central locking system on the Fiat Grande Punto. First, ensure the kit is c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos