Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch Button on a Fiat Punto

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Power window switch

How to remove the window switch button located in the passenger door panel of a Fiat Punto? This video explains how to proceed. Before starting disassembly, disconnect the battery terminals located in the engine compartment. Use a plastic or metal lever to pry between the button and the door handle. Once the button is extracted from the handle, press on the two plastic clips on it and disconnect the power cable. Finally, fit a new button into the Punto's handle (connect the power cable).

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Panel on Fiat Punto
How to Remove the Panel on Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to remove the door panel of a Fiat Punto? Open the door and let's see how to do it. Unscrew the retaining screws located in the internal handle …
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Removing the Door Panel and Window Regulator Motor on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide, learn the steps to remove the front door panel and window regulator motor on the Fiat Grande Punto, as well as the Punto Evo. First, o…
Remove the Window Regulator Motor on a Fiat Grande Punto
Remove the Window Regulator Motor on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to remove the window regulator motor from the rear door on a Fiat Grande Punto? First, use a plastic lever to remove the door trim pieces…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos