|
Do it yourself
| |||
| ||||
How to check the fluid levels on the Fiat 500 1.2 8V
Model: Fiat 500
312
- Years 2007-2024
In this video, we will see how to check the fluid levels on the Fiat 500 1.2 8V: we will need engine oil, brake fluid, coolant, and windshield washer fluid. Make sure the engine is cold and open the front hood. Start by removing the oil dipstick. Wipe it clean with a paper towel, put it back in its container, remove it again and check the level, which should be close to "max" without exceeding it. If it is below this mark, top up the oil gradually, checking each time. Next, check the coolant level. Again, it should be near the maximum level without exceeding it. If you need to top up, use fluid of the same color as what is already in the reservoir. Check the brake fluid level: in theory, brake fluid should not be consumed. If the level has dropped, it means the brake pads or discs are wearing out. Add some fluid and remember to have the vehicle checked as soon as possible. Also, check the windshield washer fluid and top up the reservoir: never fill it with just water, as it could be hard and dirty the windshield.
Posted on 22 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat 500
(2007-2024 /
312)
Perform maintenance on the levels in a Fiat 500, here’s how to top up the coolant. Pull the plastic lever located at the bottom left of the dashboard…
Fiat 500
(2007-2021 /
312)
In this video tutorial, learn how to top up the radiator fluid, along with other fluids necessary for the optimal operation of the vehicle, on a Fiat…
Fiat 500
(2020-2026 /
500 E, 332)
Checking the fluids in the Fiat 500 Hybrid's reservoirs is a task that should be performed regardless of whether the warning lights are on, especiall…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Front Bumper of the Citroën C4 Picasso?
To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.113
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |