Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of a Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

To disassemble the door panel of a Fiat 500, start by lowering the window completely to facilitate the operation. Next, remove the cover of the interior handle, which is usually secured with a screw hidden under a small plastic cover.

Use a flathead screwdriver to gently lift this cover and then unscrew the underlying screw. After removing the handle screw, locate the screws along the bottom and side edge of the door panel.

These screws may be covered by small plastic caps that need to be removed with a screwdriver. Unscrew all visible screws.

At this point, the panel should only be held in place by plastic clips. Use a plastic panel tool or a flathead screwdriver wrapped in a soft cloth to avoid scratching the paint.

Start from the bottom of the panel and gently lever to release the clips. Proceed along the perimeter of the panel, disconnecting all the clips.

Once all the clips are released, lift the panel upwards to free it from the top of the door. Be careful with the electric control cables, such as those for the window and door lock.

Carefully disconnect these cables before completely removing the panel. With the panel removed, you will have access to the inside of the door to make necessary repairs or modifications.


Posted on 3 March 2025 by ScegliAuto


Related tutorials

How to Replace the Front Door Inner Handle of the Fiat 500X
How to Replace the Front Door Inner Handle of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Today, discover the steps to remove and replace the inner handle of the front door of the Fiat 500X. First, open the front door of the vehicle and st…
How to Remove the Door Panel on a Fiat 500
How to Remove the Door Panel on a Fiat 500
Fiat 500 (2007-2024 / 312) This video demonstrates how to remove the inner door panel of a Fiat 500: remove the internal cover of the handle; underneath, you will find the firs…
How to Remove the Door Panel of a Fiat 500
How to Remove the Door Panel of a Fiat 500
Fiat 500 (2007-2021 / 312) Before you start, open the door of your Fiat 500. Begin by prising off and removing the frame of the internal door handle. Next, remove the inserts f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos