Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance (service) warning of the Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Service warning light

In this guide, we will see the instructions that will allow us to reset the oil change maintenance warning (service) of the Fiat Freemont. First of all, we get into the car and start by pressing and holding down the accelerator pedal; then we turn on the instrument panel by pressing the ignition button twice, and then press the brake pedal three times (while also keeping the accelerator pedal pressed), as shown in the video. At this point, we turn off the instrument panel; then, at the next engine start, we will see that the service warning has been reset permanently!

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Fiat Freemont?
How to Replace the Timing Belt on a Fiat Freemont?
Fiat Freemont (2011-2016 / MK 1) To replace the timing belt on a Fiat Freemont, open the bonnet to access the components located inside the engine bay: here you will need to loosen t…
How to restore the service light on the Fiat Freemont
How to restore the service light on the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) This video illustrates the procedure for resetting the service light on the Fiat Freemont. This procedure is useful after performing maintenance, as …
How to program TPMS sensors and reset the warning on the Fiat Freemont
How to program TPMS sensors and reset the warning on the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Today's main instructions will show us how to program tire pressure sensors and reset the TPMS light on the Fiat Freemont. To perform this operation,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos