Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the brake pads of a Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Brake pads

To change the brake pads of a Fiat 500, start by parking the car on a flat and safe surface. Lift the vehicle using a jack, making sure to place support stands for safety. Once lifted, remove the wheel corresponding to the brakes you want to replace. Now you have access to the brake caliper, which is attached to the disc. Using a wrench, loosen the bolts holding the caliper in place. After removing the caliper, be careful not to damage the brake hose, either by resting it carefully or suspending it so as not to put it under tension. At this point, you can remove the old brake pads, which may be slightly stuck. Use a tool to push back the caliper piston, making room for the new pads. Install the new pads in their housings and put the caliper back in place, tightening the bolts again. Make sure everything is securely in place before putting the wheel back on. After lowering the car, remember to press the brake pedal several times to readjust the pressure in the system. A short test drive will allow you to verify that the brakes are working properly.

Posted on 13 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change Brake Pads on a Fiat 500
How to Change Brake Pads on a Fiat 500
Fiat 500 (2007-2022 / 312) In this video tutorial, learn how to replace the front brake pads on a Fiat 500. First, lift the car and remove the front wheel. Now, rotate the enti…
Replacing the Front Brake Pads on the Fiat 500
Replacing the Front Brake Pads on the Fiat 500
Fiat 500 (2007-2024 / 312) This guide will show you how to remove and replace the front brake pads on the Fiat 500. First, lift the vehicle and start by removing the front whee…
How to Change Brake Pads on a Fiat 500
How to Change Brake Pads on a Fiat 500
Fiat 500 (2007-2021 / 312) How do you change the brake pads on a Fiat 500? Let's see how to remove the front brake pads of the car. Lift the car on a column lift, stopping at a…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos