Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD2 port located in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

If you are experiencing malfunctions in the control unit of your Fiat 500 and you want to use a diagnostic tool, then you must read the following guide to discover where the OBD2 port is located. First, park the car safely and remain in the driver's seat, then locate the plastic panel on the left side of the dashboard. Next, remove the panel with your hands and immediately locate the OBD2 port you were looking for. Finally, connect the diagnostic tool and the procedure is successfully completed.

Posted on 20 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) The OBD2 port of the Fiat 500 X, mandatory on all Fiat vehicles and not only, is located on the lower part of the dashboard on the driver's side. The…
Fiat 500 (2014-2022 / 500 X) When you need to connect a diagnostic tool to your Fiat 500X, it is important to know the exact location of the OBD2 port. In this new guide, we will…
Fiat 500 (2007-2024 / 312) If you do not yet know where the OBD port of your new Fiat 500 is located, do not worry because thanks to the simple procedure described below, you w…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos