Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD2 port of the Fiat 500C located?

Model: Fiat 500 312 - Years 2007-2024
Part: Checks and maintenance

If you own a Fiat 500C and are wondering what steps you need to take to find the car's OBD2 port, then all you have to do is read the following guide and apply what is described. First of all, go inside the cabin and more precisely reach the driver's seat, then remove the plastic cover located on the left side of the dashboard. Immediately after removing the plastic cover in question, locate the OBD2 port that you were looking for and you are done. If necessary, you can connect a diagnostic tool.

Posted on 25 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2022 / 312) To reset the service light on a Fiat 500c, start by turning on the instrument panel. You will see the message "change engine oil" with the oil warnin…
Fiat 500 (2014-2022 / 500 X) When you need to connect a diagnostic tool to your Fiat 500X, it is important to know the exact location of the OBD2 port. In this new guide, we will…
Fiat 500 (2007-2021 / 312) Before you can start, sit in the driver’s seat of your Fiat 500C. Begin by turning the key in the ignition switch, activating the instrument panel wi…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos