Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

How to replace the damaged headlight bulbs on a Fiat Ducato? Follow this guide: open the car door and pull up the engine bay release lever located at the bottom left of the dashboard and lift the bonnet, securing it. Unscrew the securing bolts of the headlight with a socket wrench, then remove it from its housing.

Prepare to replace the damaged bulbs (using appropriate needle-nose pliers) and proceed with reassembly.

Position the headlight in the bumper housing, screw in the previously removed bolts. Finally, close the engine cover.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulb on Fiat Ducato
How to Replace the Dipped Beam Bulb on Fiat Ducato
Fiat Ducato (2014-2026 / X290) How to replace the bulb on a Fiat Ducato? Start by lifting the front bonnet, locate the back of the headlamp, and remove the plastic cover cap. If yo…
Replacing Bulbs on Fiat Ducato
Replacing Bulbs on Fiat Ducato
Fiat Ducato (2006-2014 / X250) Replace the damaged rear headlamp bulbs on the Fiat Ducato. Remove the securing screws located above the rear headlamp using a screwdriver. Disconnec…
How to replace the front headlight bulb of the Fiat Ducato X 250
How to replace the front headlight bulb of the Fiat Ducato X 250
Fiat Ducato (2006-2014 / X250) To replace the right front headlight bulb of the Fiat Ducato model x 250, we need to open the front hood and then unscrew the screws located next to …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos