Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

Do you want to replace the diesel filter yourself without incurring labour costs? Follow these steps: first, lift the engine bonnet and secure it, once you locate the fuel filter, disconnect it from the pipes and connection cables. Remove the filter holder by hand, then unscrew the retaining washer located at the top. Pull out the worn filter and reattach the filter holder with the new filter.

Reassemble the filter holder in the engine bay with all its parts (pipes and power cables) and close the bonnet after maintenance.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Replacing the Diesel Filter on a Fiat Bravo 2 1.6 MultiJet
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the diesel filter on a second series Fiat Bravo in simple and quick steps. First, op…
How to Replace the Diesel Filter on a Fiat Bravo?
How to Replace the Diesel Filter on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the diesel filter on a Fiat Bravo, open the bonnet to access the components inside the engine bay. Here, on the left side next to the engi…
How to Replace the Diesel Filter on a Fiat Bravo?
How to Replace the Diesel Filter on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) .. In this video, you will see how to replace the diesel filter on a Fiat Bravo 198, a very simple operation. First, disconnect the.. …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos