Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Disc on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Brake rotors

Let's see how to remove the front brake disc on a Fiat Bravo. Position your car on a column lift, raising it to a comfortable height; unscrew the bolts with a socket or air drill and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the support. Use a screwdriver to detach the brake pads. Now remove the caliper support and unscrew the bolts on the brake disc (using a torx bit), then pull the disc towards you with your hands to slide it off the hub. Fit the brake disc with all the associated bolts, tighten the caliper support to the disc and the pads, then refit the brake caliper, ensuring all bolts are tightened properly.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Disc Brake Replacement on Fiat Bravo
Rear Disc Brake Replacement on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Replacing the rear disc brake on a Fiat Bravo. Replace the disc brake by disassembling the various parts. Lift the car to a comfortable height for wo…
How to Replace the Front Brake Pads of the Fiat Bravo
How to Replace the Front Brake Pads of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this tutorial, learn how to remove and replace the front brake pads of the Fiat Bravo in simple and quick steps. First, lift the vehicle and remov…
Handbrake Adjustment on a Fiat Bravo
Handbrake Adjustment on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this useful video guide, we’ll see how to adjust the handbrake on a Fiat Bravo, second generation model produced from 2007 to 2014. First, remove …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos