Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The path of the parking brake cables under a Fiat Ducato.

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Parking brake

See other generations:
Video tutorial

In this video, we see the path of the parking brake cables of a Fiat Ducato, which act on the brake calipers: when we pull the handbrake from inside, we are acting on the cable that is framed, which pulls the metal rod. This rod, through a mechanism, splits into two, so that one of the cables goes to the right wheel and the other to the left wheel, allowing each to reach the brake caliper, obviously acting simultaneously.

In this way, the vehicle is braked so that it can remain stationary in one place, without moving and without the need to apply pressure on the brake pedal.


Posted on 17 December 2025 by ScegliAuto


Related tutorials

Replacing Brake Pads on a Fiat Ducato
Replacing Brake Pads on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Are the brake pads worn and making noise? Let's see how to replace the brake pads on the Ducato. Lift the vehicle on a column lift to the desired hei…
How to Replace the Front Brake Pads on the Fiat Ducato
How to Replace the Front Brake Pads on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) This guide shows how to replace the front brake pads on the Fiat Ducato. After unscrewing the wheel bolts, lift the vehicle and complete the wheel re…
How to Replace the Leisure Battery in a Fiat Ducato Camper
How to Replace the Leisure Battery in a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) Learn how to change the leisure battery in your Fiat Ducato camper. It’s not straightforward, as you need to completely remove the driver’s seat by t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos