Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Brake pads

This guide shows how to replace the front brake pads on the Fiat Ducato. After unscrewing the wheel bolts, lift the vehicle and complete the wheel removal. At this point, detach the plastic cover protecting the bolt and unscrew it; a 6mm hex key is required. Disconnect the brake electrical connector and lift the brake caliper. Remove the two pads and push the piston fully back; replace the pad clips, ensuring the correct position. Fit the new pads and refit the brake caliper. Reassemble everything and check the proper functioning of the brake before hitting the road.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads on a Fiat Ducato
Replacing Brake Pads on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Are the brake pads worn and making noise? Let's see how to replace the brake pads on the Ducato. Lift the vehicle on a column lift to the desired hei…
How to Replace the Rear Brake Pads of the Fiat Ducato x250
How to Replace the Rear Brake Pads of the Fiat Ducato x250
Fiat Ducato (2006-2014 / X250) This guide shows how to replace the rear brake pads of the Fiat Ducato x250; this procedure is also applicable to the Citroen Relay. The first step i…
Replacing the Brake Disc on a Ducato
Replacing the Brake Disc on a Ducato
Fiat Ducato (2002-2006 / ) Change the brake disc on the Fiat Ducato along with the pads. Here’s how to remove the disc from the wheel hub. Lift the vehicle to a comfortable hei…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos