Do it yourself
Frequently asked questions about cars and motorcycles

The reset of the Service for the Fiat Panda, how is it done?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Service warning light

The very popular Fiat Panda, as shown in the attached tutorial video, is subject to scheduled maintenance, like any other vehicle, and therefore requires attention when the Service expiration light comes on. We first take care of changing the engine oil and the filter, optionally doing it yourself, and then we also reset the alarm ourselves using the method described here: with the instrument panel on, we hold down the accelerator pedal while simultaneously pressing the brake pedal seven consecutive times, and at the end of this procedure, we turn off the aforementioned panel. Operation completed.

Posted on 25 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2012-2021 / ) To reset the service light on the Fiat Panda, first follow our instructions. Get into the car and turn the key to position one to power on the vehicl…
Fiat Panda (2012-2026 / 319, MK 3) The "reset expired" message on a Fiat Panda indicates that the service should have been performed when the mileage was reached and the warning light …
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will reset the service light for the regular oil change maintenance on a Fiat Panda 1.3 MultiJet second series, but this also a…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos