Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Fiat Freemont.

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

Video tutorial

Below we will see the step-by-step instructions on how to perform the routine maintenance service, replacing the engine oil and oil filter, on the Fiat Freemont. First, we lift the vehicle and begin to unscrew the oil drain bolt located on the oil pan, allowing it to drain into a container for about ten minutes; then we use a socket wrench to unscrew the oil filter, replacing the cartridge and the seal, as shown in the video.

At this point, we unscrew the filler cap and top up with the new engine oil, filling it up to the maximum level mark indicated on the dipstick.


Posted on 6 January 2026 by ScegliAuto


Related tutorials

How to Change the Automatic Transmission Oil on a Fiat Freemont
How to Change the Automatic Transmission Oil on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) To change the oil in the automatic transmission of the Fiat Freemont, first lift the car. It is on a ramp here, but you can safely lift it without pr…
How to Replace the Diesel Filter on Fiat Freemont
How to Replace the Diesel Filter on Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Replace the diesel filter on a Fiat Freemont if you have driven many miles. Here’s how to dismantle and replace it. Lift the engine bonnet of the car…
How to Replace the Diesel Filter on a Fiat Freemont
How to Replace the Diesel Filter on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) How to replace the diesel filter on a Fiat Freemont? In this video, we will show the replacement: open the car door and pull up the engine compartmen…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos