|
Do it yourself
| |||
| ||||
Installing the Additional Chip Tuning Control Unit
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Open the front bonnet and ensure it is securely supported. Locate the connector attached to the rail injector that is under the plastic engine cover (which does not need to be removed), near the oil level dipstick. Disconnect the connector by first removing the safety clip, and connect it to the female connector of the additional control unit wiring; similarly, connect the male connector of the additional control unit wiring to the rail: this essentially creates a bypass. Finally, secure the control unit, avoiding contact with moving parts or areas prone to overheating.
Updated on 4 February 2026 by ScegliAuto
Related tutorials
Fiat Punto
(1993-1999 /
MK 1, 176)
In this video we can see the position of the immobilizer control unit of the Fiat Punto MK1: the immobilizer is an electronic security system designe…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
To program and copy a remote key, you need a transponder programmer like "zed full". First, take the new key to be programmed and insert it into the …
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
To replace the key shell on a Fiat Punto Evo, first lift the key blade and then loosen the screw located inside its housing. This will allow you to r…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
