Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and Fuse Diagram of the Fiat Doblò MK2

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Fuse box

In this video, you can see the location and fuse diagram of the Fiat Doblò MK2: the first is located in the engine compartment, to the right of the starter battery, and contains most of the fuses related to the vehicle's operation. The other container is found inside the passenger compartment, located low on the left side of the dashboard relative to the steering wheel, for the guides on the left and right of the steering wheel. This box houses the fuses related to comfort and the more practical uses of the vehicle, including fuse F3 for the cigarette lighter, which is also a power socket.

Posted on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse box diagram for the Fiat Doblo?
What is the fuse box diagram for the Fiat Doblo?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Knowing the fuse diagram or chart of your vehicle, in this case the Fiat Doblo, is an advantage, because in case of malfunction, it offers the opport…
Location of the Fuse Boxes in the Fiat Doblò
Location of the Fuse Boxes in the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) When performing maintenance on the electrical components of the Fiat Doblò, it is useful to know the exact location of the two fuse boxes in case you…
How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To reset the Service light that appears on the instrument panel of the Fiat Doblò, you will need to insert the ignition key into the ignition switch:…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2000-2009 - Where is the Fiat Doblò starter motor relay located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos