Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a 2010 Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on a 2010 Fiat Ducato (this also applies to the entire X250 model): turn on the instrument panel; the red service light will illuminate and start flashing. Turn off the ignition by putting the key in the "off" position and press the accelerator pedal fully down; simultaneously, press the brake pedal fully down seven times in succession.

Each time you press the brake, the stop light will illuminate: the goal is to make it flash seven times. After the seventh press, keep the accelerator pressed and turn the ignition to the "on" position without starting the engine, wait for the service light to stop flashing, and then switch off the ignition.

Release the accelerator pedal and turn the ignition back on to check that the service light is off.


Posted on 13 May 2026 by ScegliAuto


Related tutorials

Fiat Ducato (1981-1993 / MK 1) Hello! Today, you will learn how to reset the service light on a Fiat Ducato. Remember, this step should only be performed after completing the servi…
Fiat Ducato (2002-2006 / ) In today's video tutorial, you will learn how to reset the service light for routine maintenance on a Fiat Ducato. First, get inside the vehicle and …
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will find instructions on how to perform the routine maintenance service and reset the service light on a 2013 Fiat Ducat…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos