Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Reminder on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

After replacing the engine oil and filter on the Fiat Panda, it is important to also reset the service reminder so that the ECU can start counting the mileage until the next service. Once the mechanical work is complete, with the vehicle still in the workshop, park the vehicle on a flat surface, engage the handbrake, and turn off the engine.

From the driver's seat, turn on only the ignition: the service message with the spanner icon and the maintenance mileage indication will appear on the dashboard display. At this point, use the diagnostic tool connected to the OBD port located under the steering column.

After inserting the tester connector, select the Fiat Panda on the device screen, then the engine module or the service menu. By following the steps, access the oil maintenance reset function and confirm the operation.

The tester will then send the command to the ECU, which updates the internal service counter. Once the procedure is complete, disconnect the tool, turn off the ignition, and turn it back on to verify: the maintenance warning no longer appears, and the oil change reminder on the Fiat Panda is correctly reset in line with the service performed.


Posted on 5 June 2026 by ScegliAuto


Related tutorials

How to cancel the expired service warning on the Fiat Panda?
How to cancel the expired service warning on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The expired service message, accompanied by the warning light on the Fiat Panda, is a programmed reminder that indicates the need for regular mainten…
Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Reset the Service Light (Oil Change) on the Fiat Panda
How to Reset the Service Light (Oil Change) on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) After performing the routine maintenance service, it is necessary to reset the service light (engine oil change); let's see the procedure for the Fia…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos