Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, we will see how to replace the diesel filter in the Fiat 500, a very simple and quick operation. First, ensure that the engine is cool enough to work safely, then open the bonnet, disconnect the intake duct, and remove the air filter.

Next, locate the filter in question, disconnect the fuel lines, and unscrew the mounting bracket bolt with a 10mm socket wrench. At this point, simply extract the filter, disconnect the lower sensor connector, and install the replacement by following the reverse procedure.


Posted on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on the Fiat 500 1.3 Multijet
How to Replace the Diesel Filter on the Fiat 500 1.3 Multijet
Fiat 500 (2007-2022 / 312) This guide shows you the steps to remove and replace the diesel filter on the Fiat 500 1.3 Multijet, following the instructions below. First, open th…
How to Remove the Diesel Filter on Fiat 500
How to Remove the Diesel Filter on Fiat 500
Fiat 500 (2007-2024 / 312) Learn how to remove and replace the diesel filter on a Fiat 500. Open the car door and pull up the engine compartment release lever located at the bo…
Replacing the Diesel Filter on a Fiat 500
Replacing the Diesel Filter on a Fiat 500
Fiat 500 (2007-2024 / 312) Removing the diesel filter from a Fiat 500. Here’s how to replace it. Pull up the engine compartment release lever located at the bottom left of the …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos