Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the diesel filter on fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Diesel filter
Operation: How to remove the diesel filter on fiat 500

Let's see how to remove and replace the diesel filter on fiat 500? Let's see the replacement. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard, lift up the front hood and put it in safety. With a socket wrench we unscrew the locking pins of the diesel filter container (disconnect the power and circulation connectors). We extract the diesel filter holder: remove the worn filter and replace it with a new one, making it adhere well in the filter holder. We reassemble the fuel filter container (connect pipes and cables) and tighten the screws. We close the front hood after maintenance.


Posted on 16 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2012-2023 - How much does the diesel filter cost on my Fiat 500L with 1.3 MultiJet engine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos