Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Replacing the diesel filter on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Diesel filter
Operation: Replacing the diesel filter on Fiat 500

Disassembly of the diesel filter of a Fiat 500. Let's see the replacement. We pull up the engine compartment opening lever located at the bottom left of the dashboard, lift up the front hood and put it in safety. Using a screwdriver, unscrew the tightening screws placed on the plate that supports the filter container (disconnect the cables and the various tubes from the filter) where the filter is located. We extract the diesel filter and replace it with a new one. Finally we reassemble the fuel filter container (connect pipes and cables) and tighten the screws. We close the front hood at the end of assembly.


Posted on 26 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How much does the diesel filter cost on my Fiat 500L with 1.3 MultiJet engine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos