Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Service Reset on a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

On the Fiat Ducato, resetting the maintenance reminder is done with the vehicle stationary, the ignition on, and the engine off. Turn the key to the ON/MAR position, then press and hold the accelerator pedal fully. While keeping the accelerator pressed, pump the brake pedal several times (generally at least 6–7 complete, consecutive presses).

Once the brake sequence is finished, do not release the accelerator immediately: keep it pressed for another few seconds, then release the pedals and turn off the ignition. Wait about a minute, then turn the ignition back on and check that the oil change/maintenance warning has been reset (it may flash for a few seconds and then disappear).

If the indication remains active, repeat the procedure calmly, ensuring that the accelerator remains pressed throughout the sequence and that the brake presses are complete.


Posted on 12 July 2026 by ScegliAuto


Related tutorials

Fiat Ducato (2014-2026 / X290) Following the instructions in this guide, we will see how to reset the service light of the Fiat Ducato. First, get on board the vehicle and start pr…
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, turn on the instrument cluster by turning the key in the ignition switch: once it is on, press the acc…
Fiat Ducato (2014-2026 / X290) In order to perform the Service light reset on the Fiat Ducato, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can b…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos