Do it yourself
Frequently asked questions about cars and motorcycles

Repairing the Cracked Dashboard of the Fiat 500 and Replacing the Panel

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

The dashboard of the Fiat 500 is prone to a common defect: due to heat, the plastic deforms and the airbag cover lifts, creating an unsightly "bulge". To repair it properly, you need to remove the entire panel. Remove the consoles and side panels to access the dashboard structure. Work carefully to avoid damaging components. The repair involves repositioning the airbag cover so that it remains in place but can still deploy if necessary. This requires precise and professional work. You can purchase a new glossy fibreglass panel like the one in the video on eBay with code 377340611967 for £60, with free delivery. After the repair, reassemble the panel and all controls. The dashboard will look as good as new while maintaining safety functionality. A delicate job that requires patience.

Posted on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) The dashboard of the Fiat 500 is subject to early wear and tear, so you may find yourself facing a part of the dashboard that is lifted. In these cas…
Fiat 500 (2007-2024 / 312) How to replace the rear light bulbs on a Fiat 500? Let's see how to proceed with the replacement: first, open the boot, unscrew the screws next to th…
Fiat 500 (2007-2024 / 312) How do we change the bulbs for the manual air conditioning knobs on a Fiat 500? Let's see how to proceed. Remove the ventilation knob panel using a p…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos